I had just the opposite problem. Mine were too loose, but that was an easy remedy.
1976 Superior 54XL Restoration Log
- Thread starter Jean-Marc Dugas
- Start date
Jean-Marc Dugas
PCS Member
Installed the hardware for the FW Model 1 Cot bar. I now have the option to carry a Model 30 or Model 28 cot.
Of course there has to be issues.....I cannot find the longer cot bar. This one will work with my incubator cot, but the handle on this one ends at the foot of the Model 30 making it a little hard to reach. I may have given it to someone or misplaced it.
When I started in EMS we always had the option of using different cots depending on the situation, so this arrangement is nothing new or unusual.
The foot of the Model 30 is also exactly 12 inches from the door as required by the 1984 New Brunswick Standards for Ambulance Services.
Of course there has to be issues.....I cannot find the longer cot bar. This one will work with my incubator cot, but the handle on this one ends at the foot of the Model 30 making it a little hard to reach. I may have given it to someone or misplaced it.
When I started in EMS we always had the option of using different cots depending on the situation, so this arrangement is nothing new or unusual.
The foot of the Model 30 is also exactly 12 inches from the door as required by the 1984 New Brunswick Standards for Ambulance Services.
I should have a caddy bar in the rack. If you can't find yours.