you may remember that expression. it was rattling around in body school in the 70s. Dan showed you 1 I'll show you another. I hit a snag on the 77 and had to hold up for parts. so thought I would put the rear license plate filler panel on the 64. I had ordered it over a year ago, and it got back ordered out of the blue. It showed up last November. so it's snowing almost out, and I'm stuck on my project. what a good time to do it. we'll just slip that panel on Sunday. I put the bumper together on saw horses a year ago I do not remember the sequence exactly but it will come to me. It should just slide out right "Not." pull the bumper and pull the center support. the top is sandwiched between the face bar and the support with 4 3/8 bolts on top, two on either side. the bottom with the pinch clamps. Of course, Pinner cut two backup lights in there because Biscayne's didn't have backup lights from the factory. so it took me two days to get it on. but it's on there. the hard part was remembering where I put that jar of pinch clamps, that took a good hr. its a piece of aluminum four screws would have held it in place. not 8 3/8 bolts and 2 1/4 inch ones.
