Ok if you did not start and run the truck after putting the points in. you may have them gaped wrong. go back threw things make sure you have all you connection made and don't have a bad end on a wire. then re gap the points. if you don't have any equipment a east test is to remove a spark plug and reconnect it up to the wire. lay it on the intake so that it grounds out and spin the truck over. you ca see if you have spark. you have spark they see if someone borrowed the gas? it always best to only do one thing at a time. it takes longer but if your not a ace repair man then it's easier to put in points start the truck let it run and adjust them. then go to another thing. you get to much apart and you don't know were you went wrong, i have always found if your having trouble go to that last thing you did and see what you did wrong.