Wanted - Window regulator

Paul Steinberg

Paul Steinberg

PCS Life Member Past President 2010-2012 2020-2024
Staff member
Super Site Supporter
Looking for a right side front window regulator for my 1969 Miller Meteor. According to the Miller Meteor parts book, this part is the same from 1965 through 1970. I don't know if any other manufacturers part would interchange, however, if you have one from another manufacturer, we can compare the pictures of the part to determine this. thanks Paul
 
it would be nice to find what GM regulator they used in it. this one has not been modified by MM so it's a standard GM part. it's jumping teeth as you roll it down. comes up smooth but jumps in and out going down. has to be the bushing on the end of the shaft worn out or the teeth on the small gear cut that one direction. first time I ever saw one you had trouble going down with. as the glass on this one doesn't go all the way down it may have been a over enthusiastic man cranking hard to try to get the glass to drop that last inch. thus bending that couple teeth that direction. either way when it hits that spot going down you know it.
 
actually know that i think about it my 69 does the same thing.. Does it up and down.. If i give the glass an assist with my other hand ( a push down and a pull up) she won't skip.
 
Know that i think about it , my friend who i bought mine from said that a 65 ish to 69 ish olds would work. He was going to get to it before i had it and never did.. I will have to call him up and ask..
 
but which Oldsmobile the A, B or c body which by the way would be the same in Pontiac Chevrolet and Buick. I can tell you it's a long ways between the bolts and it has the small rollers on it. we have discovered they use the door striker off the A body
 
You must log in or register to reply here.
Back
Top