Pt Compatment panel cover WTB.....

[James Fischer]

Looking for this cover/plate for this panel...

It is mounted on passenger side by jump seat in patient compartment in the 70 Rescuer...

anyone with info please respond....

THANK YOU all !!!!!

 

[Terry Broussard]

Can you post the dimensions? I may have an old panel that fits.

 

[John ED Renstrom]

looks like that may have been the 110 volt out lets

 

[James Fischer]

looks like that may have been the 110 volt out lets

Ed,
I believe it was the FAN toggle, Cot light toggle and Vent switch and ??....

 

[James Fischer]

Can you post the dimensions? I may have an old panel that fits.

Terry,
It measures 3 1/4" Tall X 4 1/4" wide.....
Thanks
Jim

 

[Jean-Marc Dugas]

I believe it was the FAN toggle, Cot light toggle and Vent switch and ??....

That would be my guess also. That is where that panel is located in my 69 Superior.

 

[Jerry Jacobson]

Could be for this....

 

[Terry Broussard]

Terry,
It measures 3 1/4" Tall X 4 1/4" wide.....
Thanks
Jim

Jim

Wrong size by at least an inch from the '75 Cadillac I scrapped.


Mine is a 4 switch ensemble that is 4.25 by 4.25.

Sorry,
Terry

 

[James Fischer]

Could be for this....

Yep,
From what I can remember,that is about right for what goes there....
If it isnt... it IS ...very similar

 

[John ED Renstrom]

Ed,
I believe it was the FAN toggle, Cot light toggle and Vent switch and ??....

not on the vertical surface on a anbulance? thought they would have been flat on top. right side just were you laid your right arm when sitting in the attendants seat. seen then in front on a combo but don't recall one there on a ambulance

 

[James Fischer]

not on the vertical surface on a anbulance? thought they would have been flat on top. right side just were you laid your right arm when sitting in the attendants seat. seen then in front on a combo but don't recall one there on a ambulance

On my 72 its on the driver side (in patient compartment) on the "pod" right by the patients head if he were laying down.

On the 70 its on the bottom (just before the footwell starts) right by your rt leg if you were sitting in the attendants seat....

 

[Steve Loftin]

The '70 Pontiac at Fairview Auto Salvage has one; too bad the owner won't part out the remains of this car:

http://s1152.photobucket.com/albums/p496/sbl021701/?action=view&current=42ba9469.jpg

 

[James Fischer]

The '70 Pontiac at Fairview Auto Salvage has one; too bad the owner won't part out the remains of this car:

http://s1152.photobucket.com/albums/p496/sbl021701/?action=view&current=42ba9469.jpg

Its a shame too

It looks like at one time somebody parted some of it out...the back light housings are gone among other things......

I dont understand what some people are thinking when they dont budge from their way of thinking.........

 

[John ED Renstrom]

it must be by were they thought the attendance was to sit. on the front face of the wheel well it would only be visible from the rear facing seat. same as the left one only usable from a seat on the left side. I understood it in the combos to have it not visible from the loading door. MM and C/B put all thirs on top by the right front facing seat. guess they elected function over form.

 

[James Fischer]

Jim

Wrong size by at least an inch from the '75 Cadillac I scrapped.


Mine is a 4 switch ensemble that is 4.25 by 4.25.

Sorry,
Terry

Terry
Could you possibly post a picture ?
Or PM me ?
Being only 1" bigger I could make it fit by extending the cutout by an 1"..That is if you were interested in selling it,beggers cant be choosers thing....
thanks
Jim