70 Superior Rescuer Stainless trim for quarter panel

James Fischer

James Fischer

PCS Member
th_DSCN1946.jpg


Looking for this TOP STAINLESS rail on the rear quarter panel.....
for 1970 Superior Rescuer....

Any leads appreciated !!

Jim
 
Hearse or combo should be the same. but it would be a superior only pice of trim. now I have to ask are the clips still on the top to put it back on?
 
John ED Renstrom said:
Hearse or combo should be the same. but it would be a superior only pice of trim. now I have to ask are the clips still on the top to put it back on?
Click to expand...

There are NO clips......just the remnants of whatever they slathered on there to keep it in place...kind of looks like JB Weld.....:confused:
 
that's the sealer after 40 years. . so you need the molding and the clips. nothing like finally getting one and having no way to put it on. you can't buy that hardware either.
 
John ED Renstrom said:
that's the sealer after 40 years. . so you need the molding and the clips. nothing like finally getting one and having no way to put it on. you can't buy that hardware either.
Click to expand...

Ohhhhhhh....I would be HAPPY just to get the molding.......and the clips ?? :angel:........well...........
I can just use double-sided tape.....:pat:
 
James Fischer said:
Ohhhhhhh....I would be HAPPY just to get the molding.......and the clips ?? :angel:........well...........
I can just use double-sided tape.....:pat:
Click to expand...

That is a rather rare piece of trim. Scares me to death to realize the trim on my Lifeliner is siliconed on and has held very nicely.
 
Attila Bethlenfalvy said:
Do you also see the needed molding already removed laying in the back of this Superior?

dsc00225bh.jpg


I've called owner and left message asking about price/shipping with wife.
Click to expand...

Attila,
Thank you for your help in trying to locate this trim piece.....
Althought I dont see it in the picture,that does not mean its not there,I just dont recognize it.....
I here are a couple of pictures to make it a bit clearer in what I need...its about 48" long and is "U" shaped..
th_DSCN2022.jpg


th_DSCN2015.jpg


th_DSCN2014.jpg



Thanks
Jim
 
Last edited:
John ED Renstrom said:
that's the sealer after 40 years. . so you need the molding and the clips. nothing like finally getting one and having no way to put it on. you can't buy that hardware either.
Click to expand...

Ed,
I went out today and scraped some of that sealer off and found all but 3 clips underneath.....some are rusted and dont know if they will do any good....but they are there....
 
most of the time they are buried in the sealer. put on with a screw with a number of washers underneath to space it up to catch the lip. try as hard as you can I don't there is there is enough edge to get the double sided tap to hold for long. I don't see it laying in back of that one either mostly interior stuff and the bumpers
 
John ED Renstrom said:
most of the time they are buried in the sealer. put on with a screw with a number of washers underneath to space it up to catch the lip. try as hard as you can I don't there is there is enough edge to get the double sided tap to hold for long. I don't see it laying in back of that one either mosley interior stuff and the bumpers
Click to expand...

Thank you Ed for confirming........ahhhhhh..the HUNT continues...;)

By the way Ed,would you know what years if any, other then 1970,would that trim be on ??
 
By the way Ed,would you know what years if any, other then 1970,would that trim be on ??
Click to expand...

Might be the same as 68? Pic of the clips you need.
 

Attachments

  • DSC04462.jpg
    DSC04462.jpg
    45.7 KB · Views: 127
  • DSC04474.jpg
    DSC04474.jpg
    37.7 KB · Views: 125
  • 006_2A.jpg
    006_2A.jpg
    93.6 KB · Views: 139
Since I never heard back from you on the Superior emblem, I'd imagine you're going to baulk at the molding price quoted too: a whopping $150 + $75 shipping. 3 phone calls to locate molding for you; not one cent of mark up. Call yourself to verify.

dsc00269ij.jpg

dsc00224uo.jpg
 
Attila Bethlenfalvy said:
Since I never heard back from you on the Superior emblem, I'd imagine you're going to baulk at the molding price quoted too: a whopping $150 + $75 shipping. 3 phone calls to locate molding for you; not one cent of mark up. Call yourself to verify.

dsc00269ij.jpg

dsc00224uo.jpg
Click to expand...

Attila,
I dont need to call anyone ...
I appreciate your help and assistance.....If the trim is straight and not mangled...
I will be happy to take it....and I apologize for the emblem.....:hide:
I also want to pay you a finders fee,so let me know ......
Do I call the number on the card to order or ????
Please advise.....
Thank you very much !
Jim
 
Call them - which is why business card is posted. I did relay the person looking was in CA.

$75 shipping is exorbitant, even if $10 is spent on a PVC tube. See if you can't get that worked down. Good luck!
 
You must log in or register to reply here.
Back
Top