parts, parts, and more parts!

Email for more info/pics. >>>Do not PM as inbox is near capacity.<<< Am making one more parts drop in next couple weeks for pick up in Hudson. Some prices are very firm while others have a little wiggle room.

PayPal fine. Buyer responsible for shipping costs (not included). [*] means those parts are not in hand, nor priced yet. Will remove on my dime if needed. Included recently sold elsewhere.

5676368819_7e329c7aba.jpg


'55(?)-'58 Superior dash pod - Used in ambulances and combinations that holds auxiliary lighting switches. Plastic with a high mortality rate. No cracks. $85.

5677427876_08a158f1e1.jpg


'59-'62 Superior dash pod - Similar footprint as above, slightly different shape, no cracks. This one also differs by having a back lit strip across bottom with switches labeled. $85. *May fit '63-'64 as well. Sold.

'59-'64 commercial outer windshield stainless moldings - Perfect shape. Probably going to kick myself later for selling these. $275/set.

5866979950_93c1266cf9.jpg


'59-'64 Superior rear loading door glass - 2 available. $300/each. 1 sold.

5866980326_bab49bc9dd.jpg

5866981598_1452bd20ba.jpg


'59-'64 Superior jump seats - 3 pair left available: blue/gray, gray/gray, and red/white. Complete with partition hooks and extruded aluminum floor molding sets that go around opening. Conditions vary along with prices, $250-375. Blue/gray set has an additional cast aluminum decorative molding that I may remove and keep. Not often available loose.

5677011546_630abfb920.jpg


'59-'64 Superior door panels - Blue/gray. Decent originals to use as-is or for patterns if missing; not perfect but not torn up. $300/set of 4 including all original aluminum moldings. Matching rear compartment partition and wheelwell panels, $60/each including all original aluminum moldings. Front door panels sold. $150/rear pair.

5677532280_9e4131bbd4.jpg


Late '50s-early '60s heater with cover - 2 good non-leaking units available. Used in both ambulance and combination rear compartments. Not coach specific. Superior mounted vertically above/behind rear wheel, Miller Meteor mounted horizontally in subfloor. $90 for heater and two piece cover. 1 sold.

5676449297_38ca481a04.jpg


'61-'62 Superior quarter glass - 2 pair available. $290/pair. Will split for $175/each.

'63-'64 Superior quarter glass - 2 pair available. $290/pair. Will split for $175/each. 1 pair sold.
 
5867012682_1fe1f02393.jpg

5867013600_1927b6926e.jpg


'59-'62 Miller Meteor Futura/Panorama driver's corner glass. $425.

5866460171_8357d7233b.jpg


'59-'62 Miller Meteor combination - Black/white jump seats, with surrounding floor hole molding and partition hook. $500. 2 reversible panels for use as patterns, with rollers, surrounding floor opening moldings (8) and additional loose roller (1). $125. Partition glass complete with frame and 2 moldings. $150. complete set of wide extruded aluminum rear compartment inner fender moldings (6). $100. All sold.

5676926356_afdccfa5ef.jpg


'61-'62 CC fender skirts - Bone straight original paint, surface rust reverse and lowest front curved under portions. One has skeg molding. Came off Superior, should fit other builders. $175 before sandblast/primer, $225 after. Sold.

5676450543_faa48f6b56.jpg


'63-'64 Miller Meteor glass - Rear loading door glass, $300. Add $70 for each coinciding inner/outer molding set. [*Both driver's side door glass, both etched ambulance glass + partition glass available.]

'63-'64 Miller Meteor jump seats - Almost identical to '59-'62. Complete with partition hook and extruded aluminum floor molding set that goes around opening. $400. Sold.

'63 Miller Meteor license surround - Rear loading door, cast aluminum. $75.

5676911186_59ee2b6c60.jpg


'60s to ? rollers - Presentable original shape with very light scratching on a few. Very dirty but not corroded and will clean up nicely. Rollers all move and have no chunks missing. $175/set of 8. Will not split.

mod-'60s to ? Miller Meteor D pillar ambulance crosses - pitted, solid for plating, threads clean, no hardware. $45/pair.

5676924718_0ea576b949.jpg


mid-'60s to early '70s S&S cast rear compartment decoration - Large, heavy, nice shape. Don't know exactly what they're off. One small tear in fabric covered plywood as shown. Two good uses: If you're missing sconces/panels (recover fabric easily at home) or wall art. Can either ship as is or without plywood. $135/pair - will not split.
 
mid-'60s to early '70s S&S cast rear compartment decoration - Large, heavy, nice shape. Don't know exactly what they're off. One small tear in fabric covered plywood as shown. Two good uses: If you're missing sconces/panels (recover fabric easily at home) or wall art. Can either ship as is or without plywood. $135/pair - will not split.[/QUOTE]

Those cycus leaf castings are from the interior of an S&S. Very attractive.
 
Brenden will take the other pair of '63-'64 Superior quarter glass as spares in case he should ever need them. He is presently at work, and I can't get on the website, so please hold them for him. Thanks Paul
 
5676364163_587a9de8f0.jpg


'65-'68 Miller Meteor rocker stainless - 114" (bottom two shown). Good above average condition, driver quality. Few small rock pecks that can be worked out for a restored coach. Shown dirty and will polish up fine. $175/pair. These will ship in a PVC tube and will incur an oversize fee.

'65-'68 Miller Meteor rear loading door glass - 2 available. $300/each. Add $70 for each coinciding inner/outer molding set.

'65 and '67 Miller Meteor etched ambulance side glass - 2 identical pair available. Probably same design fits '65-'68. $450/pair. Will not split. Add $70 for each coinciding inner molding sets. [*One pair of second door glass + one set of partition glass available.]

'71 Superior glass - Etched/colored ambulance side glass, $425/pair. Will not split. Add $70 for both coinciding inner molding sets. Rear loading door glass, $300. Add $70 for each coinciding inner/outer molding sets. [*All 4 door glass also + partition glass available.]

5866981212_864d647afa.jpg

5866980734_e61ef1f6f5.jpg


'71-'72 Superior ambulance rear bumper - Includes HTF reverse light bezels. Both lower edges super solid with no rot. Left very nice, $225 (x2, have another w/o 2nd matching right). Right has a 1" crack from bottom edge under center step mounting (not visible), so $150. Center step decent, no rot, mounts included, will need plating. $90. Step will also fit many year and coach builder range, although there are differences between coach builder shapes. Also have another perfect pair coming in from a '70 MM that will be higher.

Rectangular reverse light bumper bezels & lenses - loose set, couple minor light pits. 3 of 4 posts broken, will need either JB Weld to use clips again or remaining posts drilled/tapped for screws. Lenses perfect. $45 bezels, $30/lenses or $65/all.

'72 Miller Meteor glass - Painted/etched? ambulance side glass, $400/pair. Will not split. Add $70 for both coinciding inner molding sets. Rear loading door glass, $300. Add $70 for each coinciding inner/outer molding sets. [*3 door glass also available.]

More updates as I go through my storage. There are plenty I'm forgetting about currently.

--------------------------------------------------------------------------

Listing these for my friend. I will place in contact directly.

5866673789_b0bb503303.jpg

5867227146_f142a0736b.jpg

5867226772_51d0bfc9d5.jpg

5866672461_5f863d1100.jpg


'71-'76(?) Miller Meteor FUL-VU LITE - There was one off ambulance before that I held in hand, that has now been misplaced somehow. Removed other 3; 1 will need motor replaced (motors dated Sept. 1969, am told through third party available). 3 pictured are numbered 350-715253, 350-655227 (bad motor), and 350-655226. All glass is perfect, aluminum showing will polish nicely, no pits. Base gaskets are shot. He had received an $800 offer for all 4 from a dealer before misplacing passenger front lite that did not get deal done. He's willing to part now thinking the missing lite has been stolen from his yard (and on my recommendation giving possible non-matching set numbers). Know that it will take more than $200/each proportionally but I do not know exactly how much higher.

5866674153_3fbb1942d2.jpg


Federal Interceptor PA - Dusty yet real nice working shape. Reverse looks as new. $100. Matching Federal CP25 siren with angled base is $125 (pending).
 
Shipping costs?

Hi Atilla...still waiting on the shipping costs for the CP25 speaker and angled base. Any word??? Numerous private emails sent with no response as yet.

Thanks.
 
Back
Top