what are these cot parts for?

Joe Puleo

Super Site Supporter
Super Site Supporter
I have a #54 Washington cot for my '59 S&S, and I'm not sure where these parts go or what they are for. This is my first ambulance and I'm still learning a lot.
 

Attachments

  • IMG_0024.jpg
    IMG_0024.jpg
    6.5 KB · Views: 165
As strictly an amateur, I will take a guess that as long as your cot sits and rolls okay and it raises and lowers as it should, then put them in a storage bin and don't worry about them.
 
the spring and clip were to hold the lower frame in the collapsed position. I have only seen them on Washington cots. needless to say that spring is stretched way out. you don't want it i could use it. the hook that is.;)
 
John, I'll try to find where it goes. if I don't have any luck, its yours.
 
half way down on the right side the spring goes on the top the clamp on the bottom
 

Attachments

  • washington #52xl up.jpg
    washington #52xl up.jpg
    199.3 KB · Views: 79
Back
Top