Jean-Marc Dugas
PCS Member
The 67's original suction unit is missing the tubing that goes into the engine compartment that provides suction.
There is a T junction off the Master Cylinder vacuum with a smaller hose that comes out of it and goes through the firewall. This smaller hose is about 3 feet long and ends up under the dash with a bolt at the end.
Is it possible that this is where the suction unit would have been connected?
There is a T junction off the Master Cylinder vacuum with a smaller hose that comes out of it and goes through the firewall. This smaller hose is about 3 feet long and ends up under the dash with a bolt at the end.
Is it possible that this is where the suction unit would have been connected?