got into a discussion on the cot mounts for the fernos. the slide that goes on the wheel well. some were mounted with 3 small screws so wit two large ones. so any one have any Ida which is the older one? and anyone know when they switched over for slotted screws to the Philips head?
this 67 has the two big screws with the nut and washer on the backside. but as I recall the smaller one has the threaded plate that went on the inside.
the small on has 1 3/4 between the screws the bigger one are 1/14
this 67 has the two big screws with the nut and washer on the backside. but as I recall the smaller one has the threaded plate that went on the inside.
the small on has 1 3/4 between the screws the bigger one are 1/14