Hearse Nameplates Available

Keith Snyder

PCS Member
I have noted that some PCS members have been looking for proper nameplates for their cars. I came across this from the Embalmers Supply Company that may be of interest to those seeking these nameplates:

ALUMINUM NAME PLATES


A distinguished way to positively identify your vehicles. Available in polished or satin finished letters with edges and back painted black. Please specify Vise or Livery (1/4" bar) or Pin Center (1/2" bar). When ordering, note the distance from center to center of the brackets mounted in the car to determine the length of the name plate bar. Script nameplates with letters extending below the bar can be cast at no extra charge, with lugs on the bar to fit the brackets and accommodate these letters. Unless otherwise specified, plate will be made to fit brackets that are mounted 12" center to center. Many custom styles, including Bright
Chrome and Brass-plated name plates also available.

Open Letter Styles
11/2" Block, 11/2" Condensed, 11/2" Broadway and 11/2" slant letter styles available in the following sizes (all capital letters)
17" Plate, holds 12 letters & spaces
26" Plate, holds 20 letters & spaces
36" Plate, holds 29 letters & spaces

2" Block letter style available in the following sizes (all capital letters or caps and lowercase, please specify)
17" Plate, holds 8 letters & spaces
26" Plate, holds 13 letters & spaces
36" Plate, holds 18 letters & spaces

3" Script and 2" Old English letter styles available in the following sizes (capital letters and lowercase, please specify)
17 " Plate, holds 9 letters & spaces
26" Plate, holds 15 letters & spaces
36" Plate, holds 20 letters & spaces

4" Block letter style available in the following sizes (all capital letters)
17" Plate, holds 5 letters & spaces
26" Plate, holds 8 letters & spaces
36" Plate, holds 12 letters & spaces

Solid Plate Style
Raised letters over a solid black background, available one line of text or two lines of text.

Decorative Styles
Torch, 71/2" x 21/2"

Wreath, available with or without letter in center,
91/2" x 91/2"

Mounting Brackets
Facilitates mounting nameplates in vehicles. Brackets sold in sets or four.
No.1 #101 – Vise or Livery type for use inside windows
No.2 #201 – Converts from Pin Center to Vise or Livery type mounting
No.4 #401 – For use with pins
No.5 #501 – For outside mounting


Groove Board Hearse Name Plate
Change the name simply by changing the letters. Stainless Steel binding with generous lip for window mounting. Black Felt standard. Two sizes available (not shown).
CC 4GB-24 24" x 4" Groove Board Name Plate
CC 4GB-27 27" x 4" Groove Board Name Plat


CONTACT: http://www.embalmers.com/hearse.html

PHONE:1-800- 243-6104
(860) 739-4200

Postal address
5 Colton Road
East Lyme, CT 06333

Shawn Beck
President
sbeck@embalmers.com
 
Back
Top